Part Number Hot Search : 
HT56R25 FA4311U REEL7 IRF741 RTL8188 93C66 VCO19 DTA143TE
Product Description
Full Text Search
 

To Download FMB857B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 FMB857B -- PNP Epitaxial Silicon Transistor
September 2007
FMB857B PNP Epitaxial Silicon Transistor
* This device is designed for general purpose amplifier application at collector currents to 300mA. * Sourced from process 68. C2 E1 C1
B2 pin #1 B1 E2
SSOT-6 Mark: .N2 Dot denotes pin #1
Absolute Maximum Ratings TC=25C unless otherwise noted
Symbol
VCBO VCEO VEBO IC TJ, TSTG Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current (DC) Operating and Storage Junction Temperature Range
Parameter
Value
50 45 5 500 -55 ~ 150
Units
V V V mA C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1. These ratings are based on a maximum junction temperature of 150 degrees C. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. All voltages (V) and currents (A) are negative polarity for PNP transistors.
Thermal Characteristics
Symbol
PD RJA
Ta=25C unless otherwise noted
Parameter
Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient
Max.
700 5.6 180
Units
mW mW/C C/W
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06".
Electrical Characteristics TC=25C unless otherwise noted
Symbol
BVCBO BVCEO BVEBO BVCEX ICBO hFE VCE(sat) VBE(on)
Parameter
Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Emitter Cutoff Voltage Collector Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage
Test Condition
IC = 10A IC = 1mA IE = 10A IC = 10A, VBE = 1V VCB = 30V, T = 25C T =150C VCE = 5V, IC = 2mA IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5 mA VCE = 5V, IC = 2mA VCE = 5V, IC = 10mA
Min.
50 45 5 50
Typ.
Max.
Units
V V V nA
15 4000 220 475 0.3 0.65 0.6 0.75 0.82
nA
V V
NOTES: All voltages (V) and currents (A) are negative polarity for PNP transistors.
(c) 2007 Fairchild Semiconductor Corporation FMB857B Rev. 1.0.0 1
www.fairchildsemi.com
FMB857B FMB857B PNP Epitaxial Silicon Transistor
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx(R) Build it NowTM CorePLUSTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FPSTM FRFET(R) Global Power ResourceSM Green FPSTM Green FPSTM e-SeriesTM GTOTM i-LoTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R)
(R)
PDP-SPMTM Power220(R)
Power247(R) POWEREDGE(R) Power-SPMTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6
SuperSOTTM-8 SyncFETTM The Power Franchise(R)
TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) UniFETTM VCXTM
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I30
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
(c) 2007 Fairchild Semiconductor Corporation FMB857B Rev. 1.0.0 2
www.fairchildsemi.com


▲Up To Search▲   

 
Price & Availability of FMB857B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X